Hello everyone,
Happy holidays. This has to be the
first time in about a month that I was able to sit down and
write an update on my research on boxed chronometres from
Omega. I was keen on getting a Omega
DeBord boxed chronometre about 6 years ago. One was on eBay
but the ending time was during my sister in-laws wedding in
Toronto ! My wife did not know it but I brought a laptop and
a phone wire with me. I ducked out of the party when
to the mtg office and set up and in turn lost it in the last
seconds. I was bummed , but kept an eye out for
another and about a year later another one popped up and to
cut a long story short I got it.
Once I got it home and after close
examination the movement was "slightly" different from the
two other Omega Debords that I have seen in, one in person
and the other via an Omega publication.
The Debord I bought.
The basic plate shapes are the same
but that is where it ends. I contacted Omega in 2000 with
the movement serial number and Omega confirmed that its a
Debord. I then asked about the slight differences in my
example of the movement (( slightly different position of
the escapement, the click was in a different position,
The balance wheel is larger, the spring barrel is like
40% larger then the std. The spring barrel is so large that
it extends past the plate of the movement. I sent Omega a
scan of the movement here is a excerpt of the reply:
John then said he would have a
technical watchmaker look into this. I never followed up but
it was always in the back of my mind.
Two months ago, I was in
communication with Marco Richon Omega Museum curator. I
asked him about it, he said look at pg 170 in the Omega SAGA
(He wrote it and it was all in French). I translated via
altavista and Eric Knyt took a shot at it as well. Not too
much info other then it had a larger main spring for better
regulation capability. Well I ask Marco a few more questions
like how many of this "modified" version did Omega actually
make. Well two months later I got a reply from Daniel
Anselmi detailing the production run...
The proper name of my example is
caliber 21/24''' Chronomètre de Bord "Observatoire
!! It was a experiment at Bienne to make a better
Debord for chronometer competitions. The version of movement
built with an oversized barrel device which permits to
increase the power reserve from around 45 to 70 hours
improving the rate stability during the first 24 hours of
the running autonomy. They made 66 examples of this
caliber
So after years of asking questions
and searching the net for additional info and photos, I have
now archived multiple photos of what I have found and wanted
to share with this with others.
The Omega Chronometre DeBords were
made with multiple DIFFERENT calibers from Omega over the
years...
They used the 1905 DDR 19"' pocket
watch movement. It was the highest quality produced at
the turn of the last century. Accuracy of one min per month.
Omega produced about 600 DDR
movements and they were not all used in Debords, they were
also sold in pocketwatch cases as Railroad watches.
Here is an DDR example in an Omega
Debord gimbled box. The button you see on the case side is
for hacking the movement.
Close up of the snail cam regualtor
of a the DDR :
Then Omega started using the
Standard version of caliber "21'''1/2 NN L bull" becoming
"47.7 NN L bull" with the newest caliber's designation in
mm. (started in 1918).
1911 - 12 movements caliber 21'''
Chronomètre de Bord
1912 - 360 movements caliber 21''
Chronomètre de Bord
This is an example of the earlier
21"' 1/2 NN L bull ( bull standing for bulletin aka a
chronometre certificate).
I like the Roman numeral dial
1919 - 66 movements caliber 21/24'''
version Chronomètre de Bord "Observatoire
This is a photo of the one in my
collection, I have never seen another one. ( that is
what started this research).
1919 - 300 movements caliber
21'''1/2 (or 47.7) version Chronomètre de Bord
For a total of 672
Chronomètre de Bord movements, using the 21"' or 47.7
mm movement
And a total of 66 movements
caliber 21/24''' version Chronomètre de Bord
"Observatoire"
Omega also used the 59-8D movement.
Which is a double spring barrel 8 day movement. I when
to the Omega museum back in 1999, I took about 200 photos
and I think they have one in their collection. I
have not seen another one. I do have a 59-8d SCS,
which is also rated as a chronometre. Its a jump
seconds desk clock. I am including photos. What
I have noticed is the movement plate finish is very similar
to that of the Chronomètre de Bord
"Observatoire.
I am seeking pictures of other Omega
Chronometre DeBords. If you have one please let me
know.
Good Hunting
:
mailto:bsohne@gmail.com
" about the "
Chronomètre de bord "... we cannot identify
exactly the movement which should be a 21''', but has
some strange and different parts"